| CAS No.: | 38891-59-7 |
|---|---|
| Formula: | [CH(CH2cl)CH2o]N |
| EINECS: | 38891-59-7 |
|
Still deciding? Get samples of US$ 4/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
Surface preparation |
Correct substrate preparation is critical for optimum performance. Surface should be sound, clean, dry and free from loose particles,oil,grease,and other contaminants. |
|
Primer |
Prepare a barrel, pour JD-D10A and JD-D10B in it based on 1:1. Stir the mixture well and then apply it with roller or trowel. The reference consumption is 0.15kg/m².The main purpose of this primer is to seal the substrate completely and avoid air-bubbles in the body coat. A second coat may be required depending on the oil absorption condition of substrate. The recoat time is about 8 hours. |
|
Inspection standard for the primer: even film with certain brightness. |
|
|
Undercoat |
Mix WTP-MA and WTP-MB based on 5:1 first, then add quartz powder (1/2 of the mixture of A and B) into the mixture, stir it well and apply with trowel. The consumption quantity of A and B is 0.5kg /sqm. You can do it one coat at one time or two coats at two times. In the second case, the application interval is about 8 hours at 25 degrees. Sand the first layer, clean it and then apply the second layer. After the whole application, wait another 8 hours, grind it, clean the sanding dust and then continue the next procedure. |
|
Inspection standard for the undercoat: Non-sticky to hand, no softening, no nail print if you scratch the surface. |
|
|
Top coat |
Mix JD-2000A and JD-2000 B based on 5:1 and then apply the mixture with spatula. The consumption quantity is 1.0kg/sqm. |
|
Maintenance |
5-7 days. Don't put the floor into use or wash it with water or other chemicals. |
Scope of application: Especially suitable for the ground that there is water or oil, And all the requirements of preventing slippery ground.
Performance characteristics :
1,Without solvent epoxy resin and high quality curing agent
2,Surface shaddock effect, the pattern can be can small
3,Resistant acid, alkali, salt and oils corrosion.
4,Wear-resisting, withstand voltage , impact resistance.
Use fixed number of year over five years
| Hardness, Shore Hardness | ≥90 |
| Abrasive resistance(750g,500r,CS-17)g | ≤0.06 |
| bending strength,Mpa | ≥6 |
| Compressive strength ,Mpa | ≥70 |
| Tensile strength | ≥8 |
| Water resistance,7d | resistance |
| Resistant H2SO4,10%,7d | resistance |
| Resistant NaOH,10%,7d | resistance |
| Resistant Gasoline120#,7d | resistance |
Construction technology:
1,Base face processing
2,Painting closed primer
3,Scraping epoxy mortar
4,Prevent slippery Putty layer
5,Scraping Non-slip surface paint , done with roller galling
Construction structure:
Non-slip surface paint putty layer mortar layer primer base surface
){kind=link}